What do you pay attention to when installing led ceiling light?

The first thing to note is that when installing led ceiling light in masonry structures, it is necessary to accurately use embedded bolts, or use expansion bolts, nylon plugs and plastic plugs for fixing; wooden wedges cannot be used. The capacity should match the weight of the led ceiling light. Therefore, the LED ceiling lamp can be ensured to be firmly fixed and reliable, and its service life can be extended.

When using an expansion bolt to fix the led ceiling light, the bolt specifications need to be selected according to the technical requirements of the product. The diameter of the drill hole and the depth of the embedment are generally consistent with the bolt specifications. LED ceiling lamps cannot be directly installed on flammable objects. Some families basically use painted three plywood to line the back of the LED ceiling lamps for aesthetics. This is very dangerous, so it is necessary to take insulation measures. When the high-temperature part of the surface of the lamp is close to combustible materials, it is also necessary to take measures for heat insulation and heat dissipation.

led ceiling light
For led ceiling light installation, the number of bolts for fixing the lamp holder should not be less than the number of fixing holes on the base of the lamp, and the diameter of the bolts should match the hole diameter; the lamp has no fixing holes on the base. The LED ceiling lamp needs to be checked before installation. The cross section of the core of the lead wire leading to each LED ceiling lamp should not be less than 0.4mm2, and the copper core should not be less than 0.5mm2, otherwise the leads need to be replaced. The connection to the lamp head of the LED ceiling lamp and the connection of the parallel wires between the lamp heads must be firm, and the electrical contact should be good, so as to avoid sparks between the wires and the terminals due to poor contact, which is more dangerous.